Shop / HI-BAYS / HI BAY REMOTE CONTROL

HI BAY REMOTE CONTROL

Product Code: R3111-S-Remote

$25.00 ex. GST


  • To Suit R3111-S Hi-Bay

 

RAPID LED HI BAY REMOTE INSTRUCTIONS

 

3 Year Warranty

+ -

Share it:
Battery Type

AAA x 2

Batteries Included

Yes

ON / OFF

1. "ON/OFF" key only functions as a switch of the light.
2. Press this button to turn off the map before it's short circuited, the lamp will remain off after power-on again.

Auto Mode

Press "Auto Mode" button, the sensor starts to work and all settings remain the same before the light gets switched on/off.

Reset

1. Press "Reset" button, change brightness to max level.
2. Press "Reset" button, products with DIP switch will be controlled by DIP switches; otherwise all the setting will be just initial, that is 100% detection range, hold time 5S, no stand-by time and daylight threshold disabled.

Plus / Minus

1. To adjust brightness 10-100% in on/off mode.
2. To adjust highest brightness 60-100% in sensor mode.

Start

Press "Start" to customize scene, users can change detection range, daylight threshold, hold time, standby dimming level and standby period.

Memory

1. Press "Memory" to save all the settings.
2. Settings remain the same as the last time if values are not reset.

Apply

1. Press "Apply" to deliver the saved setting.
2. Press "Apply" without "memory" will make all the settings
one-time operation.
3. Settings should be done within 30S, otherwise it exits memory mode.

Detection Area

Detection area (Press to define detection area 100% / 75% / 50% / 25%.)

Hold Time

Hold time (Press to define hold time 5s / 30s / 1min / 3min / 5min / 10min / 20min / 30min)

Stand-By Dimming Level

Stand-by dimming level (Press to define stand-by dimming)

Stand-By Period

Stand-by period (Press to define stand-by period 0s / 10s / 30s / 1min / 5min / 10min / 30min / +oo.)
Note: "0s" means no standby period; "+oo"
means unlimited standby period.

Daylight Threshold

Daylight threshold
(Press to define daylight level 2Lux / 10Lux / 30Lux / 50Lux / 80Lux / 120Lux / Disable.)
Note: Disable means light will be turned on once sensor detects movement, regardless of the ambient lux.

Test Mode

The button "Test (2s)" is for testing purpose after commissioning. Pressing this button, the sensor goes to test mode
( hold time is only 2s )

Sensor Installation Method

The distance between the inductor and the sensor is 4m wide. Recommended installation of sensor suction ceiling height is 3-6m. Wall mounting height suggested is 1-1.8m.
The remote controls the most remote distance 15m (in different places remote control distance will have the deviation)

Weight

Including Battery – 56.5g

Warranty

3 Years

SKU: R3111-S-Remote Category: Tags: , ,